Reef Carbonate - Seachem

Welcome, please sign in

MY ACCOUNT |

MY CART

[ 0 ITEM ]

Additives & Water Conditioners

Air Pumps & Accessories

Aquarium Stands

Aquariums

Books

Calcium Reactors & Media

Chillers

Controllers & Monitors

Coral Propagation Tools

Decorations

Dosers & Top Off

Feeding Accessories

Filter Media

Filters

Food

Food Supplements & Vitamins

Heaters & Thermometers

Lighting

Maintenance & Cleaning

Medications & Remedies

Miscellaneous Supplies

Overflow Boxes

Plumbing Supplies

Powerheads

Protein Skimmers

Pumps

Reverse Osmosis Units

Sand & Substrates

Sumps & Refugiums

Testing Equipment

Test Kits

UV Sterilizers

Wave Makers

You are here: Home » Aquarium Supplies » Additives & Water Conditioners » Reef Carbonate

Reef Carbonate

Seachem


	Restores and maintains alkalinity
	Will not deplete calcium, magnesium, or strontium
	Easy and convenient to use

Description

Reef Carbonate™ is a concentrated (4,000 meq/L) optimized blend of carbonate and bicarbonate salts designed to restore and maintain alkalinity in the reef aquarium. Calcium and carbonates are essential to all coral growth. If either becomes deficient, coral growth will cease, followed by a rapid decline in coral health. To prevent this you must provide carbonates and calcium.
Used as directed, Reef Carbonate™ will not deplete calcium, magnesium, or strontium which usually tend to precipitate with increasing alkalinity. Reef alkalinity should be maintained at 3–5 meq/L (8–14 dKH). Alkalinity should not be allowed to fall below 2 meq/L.

Tech Notes

BEGINNER: Use 1 capful (5 mL) per 80 L (20 gallons) twice a week. Best if diluted into a cup of freshwater, then added. Check alkalinity every 2 weeks and adjust dose or frequency accordingly.

ADVANCED: Check alkalinity, then follow dosing regimen above until alkalinity is adjusted to 4–5 meq/L. Each dose will raise alkalinity by about 0.25 meq/L. Size or frequency of dose can be adjusted, but do not exceed 1 meq/L per day. Thereafter, use as required to maintain alkalinity.

EXPERT: After determining the alkalinity consumption rate, set up a continuous drip system. Use the following formula to determine how much to add to your top-off water: m=va (m=mL of product to add to top off water, v=volume of tank in gallons, a=amount to raise alkalinity in meq/L). For example, if you want to raise alkalinity by 1 meq/L in a 50 gallon tank, then you would add 50x1=50 mL into the top-off water.

HINTS: Best to pour in gradually near strong water movement. Do not add to a sump or other area of slow water exchange.

DO NOT OVERDOSE: Excess alkalinity may enhance the loss of calcium, magnesium, and strontium. Do not directly mix with any calcium, magnesium, or strontium supplement. Best if calcium & carbonate additives are added on alternate days or at least 30 minutes apart.