Reef Buffer - Seachem

Welcome, please sign in

MY ACCOUNT |

MY CART

[ 0 ITEM ]

Additives & Water Conditioners

Air Pumps & Accessories

Aquarium Stands

Aquariums

Books

Calcium Reactors & Media

Chillers

Controllers & Monitors

Coral Propagation Tools

Decorations

Dosers & Top Off

Feeding Accessories

Filter Media

Filters

Food

Food Supplements & Vitamins

Heaters & Thermometers

Lighting

Maintenance & Cleaning

Medications & Remedies

Miscellaneous Supplies

Overflow Boxes

Plumbing Supplies

Powerheads

Protein Skimmers

Pumps

Reverse Osmosis Units

Sand & Substrates

Sumps & Refugiums

Testing Equipment

Test Kits

UV Sterilizers

Wave Makers

You are here: Home » Aquarium Supplies » Additives & Water Conditioners » Reef Buffer

Reef Buffer

Seachem


	Will safely raise your pH to 8.3
	Raises carbonate alkalinity
	Convenient and easy to use

Description

Reef Buffer™ is intended primarily for use in a reef system where the maintenance of a pH of 8.3 is often difficult. When used as directed Reef Buffer™ will raise the pH of your reef system to 8.3 without fear of accidentally overshooting the pH to a dangerous level. Reef Buffer™ will also raise carbonate alkalinity. Reef Buffer™ is a blended product and is not just sodium carbonate.

Tech Notes

Check pH and alkalinity before use. Use 5 g (1 level teaspoon) for every 150 L (40 gallons) to raise pH by about 0.1 pH units (this will also raise alkalinity by about 0.5 meq/L). Dissolve in at least one cup of freshwater, then add to the tank. The pH of natural sea water is 8.25–8.30. In a well established reef system pH adjustment may be necessary biweekly to semiweekly. Dosing requirements will vary, but do not exceed the recommended dose without checking your pH and alkalinity (alkalinity should not exceed 6 meq/L). If an alkalinity of 6 meq/L has been reached and a pH of at least 8.20 has not been attained or substantial cloudiness that does not clear within 15 minutes is encountered, then the system is not ionically balanced. To restore ionic balance perform a water change or adjust the magnesium and calcium levels to approximately 3:1 Mg:Ca (calcium does not need to exceed 400 mg/L).

DO NOT OVERDOSE: Excess alkalinity may enhance the loss of calcium, magnesium, and strontium. Do not directly mix with any calcium, magnesium, or strontium supplement.